Safeguard Engine Settings; Cpu Protect Counters - D-Link DGS-1250 Series Reference Manual

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide

Safeguard Engine Settings

This window is used to display and configure the safeguard engine settings.
To view the following window, click Security > Safeguard Engine > Safeguard Engine Settings, as shown below:
The fields that can be configured in Safeguard Engine Settings are described below:
Parameter
Safeguard Engine State
Trap State
The fields that can be configured in CPU Utilization Settings are described below:
Parameter
Rising Threshold
Falling Threshold
Click the Apply button to accept the changes made.

CPU Protect Counters

This window is used to view and clear the CPU protection counter information.
To view the following window, click Security > Safeguard Engine > CPU Protect Counters, as shown below:
Figure 9-57 Safeguard Engine Settings Window
Description
Select to enable or disable the safeguard engine feature here.
Select to enable or disable the safeguard engine trap state here.
Description
Enter the rising threshold value here. This value must be between 20% and
100%. This value is used to configure the acceptable level of CPU utilization
before the Safeguard Engine mechanism is enabled. Once the CPU utilization
reaches this percentage level, the Switch will move into Exhausted mode, based
on the parameters provided in this window.
Enter the falling threshold value here. This value must be between 20% and
100%. This value is used to configure the acceptable level of CPU utilization as a
percentage, where the Switch leaves the Safeguard Engine state and returns to
normal mode.
Figure 9-58 CPU Protect Counters Window
213