DGS-3100 Gigabit Ethernet Switch Manual
Parameters
Restrictions
Example usage:
To enable 802.1x switch wide
disable 802.1x
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable 802.1x on the Switch:
show 802.1x auth_state
Purpose
Syntax
Description
None.
Only administrator-level users can issue this command.
:
DGS3100
# enable 802.1x
Success.
DGS3
100
#
To disable the 802.1x server o
disable 802.1x
The disable 802.1x com
Network Access control server application on the Switch.
None.
Only administra
DGS3100# disable 802.1x
Success.
DGS3100#
To display the current authentication state of the 802.1x server on the
Switch.
show 802.1x auth_state {ports <portlist>}
The show 802.1x auth_state command displays the current 802.1x
authentication state of the specified ports of the Port-based Network
Access Control server application on the Switch.
The following details are displayed:
Port number − Shows the physical port number on the Switch.
Auth PAE State: Initialize / Disconnected / Connecting / Authenticati
/ Authenticated / Held / ForceAuth / ForceUnauth − Shows the curre
state of the Authenticator PAE.
Backend State: Request / Response / Fail / Idle / Initialize / Succes
Timeout − S
Port Status: Authorized / Unauthorized − Shows the result of th
authentication process. Authorized means that the user
authenticated, and can access the network. Unauthorized means t
the user was not
n the Switch.
mand disables the 802.1x Port-based
tor-level users can issue this command.
hows the current state of the Backend Authenticator.
authenticated, and cannot access the network.
104
ng
nt
s /
e
was
hat