Delete Vlan; Config Vlan - D-Link DGS-1210/ME series Reference Manual

delete vlan

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To remove a vlan which VLAN ID is 2:

config vlan

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
To delete a previously configured VLAN on the Switch.
delete vlan [<vlan_name 32> | vlanid <vidlist>]
The delete vlan command deletes a previously configured VLAN on
the Switch.
<vlan_name 32> − The name of the VLAN to be deleted.
vlanid <vidlist> − The VLAN of the VLAN to be deleted. The range is
between 2-4092.
Only administrator or operator-level users can issue this command.
A user is required to disable Guest VLAN before deleting a VLAN.
DGS-1210-28P/ME:5# delete vlan vlanid 2
Command: delete vlan vlanid 2
Success.
DGS-1210-28P/ME:5#
To add additional ports to a previously configured VLAN and to
modify a VLAN name.
config vlan [<vlan_name 32> | vlanid <vidlist>] [[add [tagged |
untagged | forbidden] | delete ] [<portlist> | name <vlan_name
32>] {advertisement [enable | disable]}
The config vlan command allows the user to add or delete ports to
the port list of a previously configured VLAN. You can specify the
additional ports as tagging, untagging, or forbidden. The default is to
assign the ports as untagged.
<vlan_name 32> − The name of the VLAN to be configure.
vlanid <vidlist> − The ID of the VLAN to which to add ports.
add − Specifies that ports are to be added to a previously created
vlan.
delete - Specifies that ports are to be deleted from a previously
created vlan.
tagged − Specifies the additional ports as tagged.
untagged − Specifies the additional ports as untagged.
forbidden − Specifies the additional ports as forbidden.
<portlist> − A port or range of ports to be added to or deleted from
the VLAN.
name <vlan_name 32> − Enter the vlan name for the specified vlan
id.
advertisement [enable | disable] − Specifies that the vlan
advertisement is enabled or disabled.
Only administrator or operator-level users can issue this command.
223