Config Multicast Filtering_Mode; Show Multicast Filtering_Mode - D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
To display the aging time:

config multicast filtering_mode

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure multicast filtering

show multicast filtering_mode

Purpose
Syntax
Description
Parameters
Restrictions
83
1 default 00-01-30-10-2C-C7 10
1 default 00-01-30-FA-5F-00 10
1 default 00-02-3F-63-DD-68 10
More: <space>, Quit: q, One line: <return>l
DGS3100# show fdb aging_time
Unicast MAC Address Aging Time = 5
DGS3100#
To configure multicast filtering.
config multicast filtering_mode [<portlist> | <ch1-32> |
all][forward_unregistered_groups | filter_unregistered_groups]
The config multicast filtering_mode command enables filtering of
multicast addresses.
<portlist> - A port or range of ports to be configured.
<ch1–32> - A LAG ar range of LAGs to be configured.
all - All ports to be configured.
forward_unregistered_groups - Forwards unregistered multicast
packets.
filter_unregistered_groups - Filter unregistered multicast packets.
Only Administrator or operator-level users can issue this command.
DGS3100# config multicast filtering_mode 1
filter_unregistered_groups
Success.
DGS3100#
To display multicast filtering settings on the Switch.
show multicast filtering_mode {portlist>|<ch1-32>|all }
The show multicast filtering_mode command displays the
multicast filtering settings..
<portlist> - A port or range of ports to be configured.
<ch1-32> - A LAG ar range of LAGs to be configured.
all – All ports to be configured.
Only Administrator or operator-level users can issue this command.
Dynamic
Dynamic
Dynamic