Config Time_Zone Operator; Config Dst - D-Link DGS-1100-06/ME Cli Reference Manual

Metro ethernet managed switch
Hide thumbs Also See for DGS-1100-06/ME:
Table of Contents

Advertisement

DGS-1100-06/ME:5#config time 09jan2012 15:50:50
Command: config time 09jan2012 15:50:50
Success!
DGS-1100-06/ME:5#

config time_zone operator

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure time zone settings:
DGS-1100-06/ME:5#config time_zone operator + hour 2 minute 30
Command: config time_zone operator + hour 2 minute 30
Success!
DGS-1100-06/ME:5#

config dst

Purpose
Syntax
Description
Parameters
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
To determine the time zone used in order to adjust the system clock.
config time_zone operator [+ hour <gmt_hour 0-13> minute
<minute 0-59> | - hour <gmt_hour 0-12> minute <minute 0-59>]
The config time_zone operator command adjusts the system clock
settings according to the time zone. Time zone settings adjust SNTP
information accordingly.
operator – May be (+) to add or (-) to subtract time to adjust for time
zone relative to GMT.
hour <gmt_hour 0-13> – Specifies the number of hours difference
from GMT.
Minute <minute 0-59> – Specifies the number of minutes added or
subtracted to adjust the time zone.
Only administrator or operator level users can issue this command.
To configure time adjustments to allow for the use of Daylight Saving
Time (DST).
config dst [disable | [annual s_date <start_date 1-31> s_mth
<start_mth 1-12> s_time <start_time> end_date <int 1-31>
e_mth <end_mth 1-12> e_time <end_time> | offset [30 | 60 | 90 |
120]]]
The config dst command disables or configures Daylight Saving
Time (DST). When enabled, this adjusts the system clock to comply
with any DST requirement. DST adjustment affects system time for
both manually configured time and time set using SNTP service.
disable – Disables the DST seasonal time adjustment for the Switch.
annual – Enables DST seasonal time adjustment on an annual
basis. Annual mode requires that the DST beginning and ending
date be specified concisely. For example, specify to begin DST on
April 3 and end DST on October 14. The format for annual mode is
as follows, and in the order listed:
195

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents