18. Remove the air tight housing.
19. Disconnect the fuel tank solenoid valve electrical
connector and remove the fuel tank solenoid
valve from the fuel tank.
20. Remove the fuel tank one-way valve from the
fuel tank.
Installation
NOTE: Install a new fuel tank level sensor
1.
gasket.
To install, reverse the removal procedure.
WARNING: Before the vehicle is tested
2.
for normal operation, carry out the fuel
system leak test. Failure to follow this
instruction may result in personal injury.
Check the fuel system for leaks. For additional
information, refer to Section
System - General Information
System - General
http://vnx.su
310-00A Fuel
/
310-00B Fuel
Information.