Exhaust System - Diesel Particulate Filter (DPF)
Removal and Installation
General Equipment
Ford diagnostic equipment
Removal
NOTE: Removal steps in this procedure may contain installation details.
Installation
1. To install, reverse the removal procedure.
2.
Carry out the powertrain control module (PCM) Reset the Diesel
Particulate Filter Learned Values service function.
Carry out the powertrain control module (PCM) Reset the Diesel
Particulate Filter Differential Pressure Sensor Learned Values service
function.
General Equipment:
http://vnx.su
Transit/Tourneo Connect 2002.5 (06/2002-)
1.
CAUTION: If
1.
the component is loose, a
new component must be
installed.
Torque: 48 Nm
Ford diagnostic equipment
Print