Ford Transit 2002 Owner's Manual page 1075

PINPOINT TEST C : THE ENGINE CRANKS SLOWLY
TEST CONDITIONS
C1: CHECK FOR VOLTAGE DROP
C2: CHECK FOR GROUND CONNECTION
REPAIR the circuit. TEST the system for normal
operation.
DETAILS/RESULTS/ACTIONS
Ignition switch in position III.
1
Measure the voltage between the starter motor
2
terminal 30, component side and the battery
positive terminal.
Is the voltage less than 0.5 volts?
Yes
GO to C2.
No
CLEAN and TIGHTEN all battery positive cable
connections. TEST the system for normal operation.
If the concern persists, INSTALL a new battery to
starter motor solenoid cable. REFER to Section
414-01 Battery, Mounting and
system for normal operation.
Ignition switch in position III.
1
Measure the voltage between the starter motor
2
case and the battery ground terminal.
Is the voltage less than 0.5 volts?
Yes
INSTALL a new starter motor.
REFER to Starter Motor - 1.8L
Starter Motor - 1.8L Diesel
TEST the system for normal operation.
No
CLEAN and TIGHTEN all battery ground cable
connections, starter motor mounting and body to
ground straps. TEST the system for normal
operation. If the concern persists, INSTALL a new
battery ground cable. Test the system for normal
operation.
http://vnx.su
Cables. Test the
/
in this section.