Ford Transit 2002 Owner's Manual page 1274

it.
Assembly
1. NOTE: Do not oil taper roller bearings which
are to be used again. Install new taper roller
bearings untreated.
Carefully clean and check all parts and coat with
transmission fluid
2. Fit the spur gear to the differential.
Tighten the bolts evenly, working
diagonally.
NOTE: The speedometer worm gear / sensor
3.
ring for the vehicle speed sensor must
engage in the recess on the housing.
Press on the taper roller bearing (illustration
shows 1.8L diesel engine).
1. Attach the speedometer worm gear (1.8L
diesel engine) or VSS ring (1.8L engine).
2. Press on the taper roller bearing using
press and the special tool.
CAUTION: Do not use the taper roller
4.
bearing as a support.
Install the taper roller bearing (spur gear end)
(illustration shows 1.8L diesel engine).
Support the differential under the spur
gear.
Press on the taper roller bearing using the
http://vnx.su
before reassembly.
a