Ford Transit 2002 Owner's Manual page 1294

4. Install the transaxle right-hand lower retaining
bolt.
5. Remove the retaining
6. Remove the transmission
7. CAUTION: If brake fluid is spilt on the
paintwork, the affected area must be
immediately washed down with cold water.
NOTE: Make sure the spring clip is correctly
seated.
Connect the clutch slave cylinder supply line to
the transaxle.
Install the spring clip.
8. Install the transaxle right-hand retaining bolts.
9. Attach the starter motor to the transaxle.
http://vnx.su
straps.
jack.