Ford Transit 2002 Owner's Manual page 1333

Exhaust System - Exhaust Flexible Pipe—
1.8L Duratorq-TDDi (Lynx) Diesel,
Vehicles With: One-Piece Catalytic
Converter and Exhaust Flexible Pipe
Removal and Installation
General Equipment
Exhaust pipe cutter
Materials
Name
Grease
Specification
SA-M1C9107-A
Removal
1. Remove the catalytic converter.
For additional information, refer to:
Converter - 1.8L Duratorq-TDCi (Lynx)
Diesel/1.8L Duratorq-TDDi (Lynx) Diesel
Exhaust System, Removal and Installation).
2. Using an
flexible pipe from the catalytic converter in the
position shown.
Installation
1.
forward of the catalytic converter.
NOTE: Do not fully tighten the catalytic
converter to cylinder block retaining bolt at
this stage.
Install the catalytic converter.
2. NOTE: Do not fully tighten the exhaust
flexible pipe to catalytic converter clamp
retaining nut at this stage.
NOTE: Make sure that the exhaust flexible
pipe locating cut out is aligned with the
locating dowel on the catalytic converter.
Install the exhaust flexible pipe.
3. NOTE: Coat the muffler and tail pipe
assembly studs with grease.
NOTE: Install a new exhaust flexible pipe to
muffler and tailpipe assembly gasket and
retaining nuts.
NOTE: Do not fully tighten the exhaust
flexible pipe to muffler and tailpipe assembly
http://vnx.su
Transit/Tourneo Connect 2002.5 (06/2002-)
exhaust pipe cutter, cut the exhaust
CAUTION: Never use jointing compound
Print
Catalytic
(309- 00