Fuel Tank and Lines - Inertia Fuel Shutoff
(IFS) Switch
Removal and Installation
3. Remove the components in the order indicated in the following illustration(s) and table
(s).
Item
Part Number
1
-
2
-
3
-
4. To install, reverse the removal procedure.
Installation Details
Item 3 : IFS switch
NOTE: Make sure the IFS switch is in the reset position.
Left-hand drive vehicles
1. Remove the passenger side instrument panel
lower footwell trim panel.
All vehicles
2. Remove the right- hand side cowl side trim panel.
For additional information, refer to Section
05 Interior Trim and
Description
IFS switch electrical connector
IFS switch retaining bolts
IFS switch
See Installation Detail
http://vnx.su
Transit/Tourneo Connect 2002.5 (06/2002-)
Ornamentation.
Print
501-