Ford Transit 2002 Owner's Manual page 1291

31. Attach the VSS electrical wiring harness to the
transaxle.
32. CAUTION: If brake fluid is spilt on the
paintwork, the affected area must be
immediately washed down with cold water.
Connect the clutch slave cylinder supply line to
the clutch slave cylinder.
Install the spring clip.
33. Install the air cleaner.
For additional information, refer to:
Cooler - 1.8L Duratorq-TDCi (Lynx) Diesel/1.8L
Duratorq-TDDi (Lynx) Diesel (75 PS/90 PS)
(303-12 Intake Air Distribution and Filtering,
Removal and Installation).
Connect the intake air temperature (IAT)
sensor electrical connector.
34. Attach the air cleaner outlet pipe and the PCV
hose to the engine.
35. Install the charge air cooler left-hand pipe.
http://vnx.su
Charge Air