exhaust hanger insulators.
Detach the exhaust flexible pipe from the tailpipe
and muffler assembly.
Discard the nuts.
6. Detach the catalytic converter from the cylinder
block.
7. Remove the catalytic converter.
Installation
All vehicles
NOTE: Only tighten the bolt finger tight at
1.
this stage.
Attach the catalytic converter to the cylinder
block.
NOTE: Only tighten the nuts finger tight at
2.
this stage.
Attach the exhaust flexible pipe to the tailpipe
and muffler assembly.
Coat the studs with grease.
Install new nuts.
Vehicles with variable vane turbocharger
CAUTION: Jointing compound must not
3.
be used forward of the catalytic converter.
NOTE: Only tighten the nuts finger tight at
this stage.
NOTE: Make sure that the exhaust flanges
are correctly aligned.
Install the catalytic converter to turbocharger
nuts in the sequence shown.
Coat the studs with grease.
Install new nuts.
http://vnx.su