Ford Transit 2002 Owner's Manual page 1352

This procedure involves fuel handling. Be prepared for fuel spillage at all times and
always observe fuel handling precautions. Failure to follow these instructions may result
in personal injury.
CAUTION: Fuel injection equipment is manufactured to very precise tolerances and
fine clearances. It is therefore essential that absolute cleanliness is observed when
working with these components. Always install blanking plugs to any open orifices or
lines.
NOTE: Fuel supply line connectors are white or are identified by a white band. Fuel return
line connectors are red or are identified by a red band.
1. Push the connector on to the fuel filter.
2. Install the fuel line to the fuel line quick release
coupling.
CAUTION: Make sure the quick release
3.
coupling primary locking tang clicks into
place when installing.
Insert the fuel line quick release coupling
secondary locking tang into the fuel line quick
release coupling.
CAUTION: After installation, to make
4.
sure that the fuel line is fully seated, pull on
the line.
Install the fuel line quick release coupling.
CAUTION: After installation , to make
5.
sure that the vent line is fully seated, pull on
the line.
Install the fuel tank vent line quick release
coupling.
http://vnx.su