Ford Transit 2002 Owner's Manual page 1332

Installation
1. NOTE: Do not fully tighten the exhaust
flexible pipe to catalytic converter clamp
retaining nut at this stage.
NOTE: Make sure that the exhaust flexible
pipe locating cut out is aligned with the
locating dowel on the catalytic converter.
Install the exhaust flexible pipe.
2. NOTE: Coat the muffler and tailpipe
assembly studs with grease.
NOTE: Install a new exhaust flexible pipe to
muffler and tailpipe assembly gasket and
retaining nuts.
NOTE: Remove the cable ties.
Attach the exhaust flexible pipe to the muffler
and tailpipe assembly.
3. Tighten the exhaust flexible pipe to catalytic
converter clamp retaining nut.
CAUTION: Over bending of the exhaust
4.
flexible pipe may cause damage resulting in
failure.
Remove the exhaust flexible pipe support wrap
or splint.
5. Lower the vehicle.
http://vnx.su