16. Attach the engine wiring harness to the bracket.
17. Connect the transaxle breather tube to the
transaxle.
Clip the breather tube.
18. Connect the the reversing lamp switch electrical
connector.
19. Raise and support the vehicle. For additional
information, refer to Section
Lifting.
20. Attach the gearshift cables to the transaxle.
1. Attach the gearshift cable to the bracket
and turn the abutment sleeve
counterclockwise.
2. Attach the selector cable to the bracket
and turn the abutment sleeve
counterclockwise.
21. Adjust the gearshift cables. For additional
information, refer to Section
http://vnx.su
100- 02 Jacking and
308-00 Manual