Ford Transit 2002 Owner's Manual page 1206

2. Disconnect the clutch slave cylinder supply
line from the clutch master cylinder and
position it to one side.
Allow the fluid to drain into a suitable
container.
8. Remove the clutch master cylinder retaining
bolts.
9. Remove the clutch master cylinder.
Release the clutch master cylinder from
the pedal assembly.
Detach the clutch master cylinder
actuating rod from the clutch pedal.
Installation
1. Install the clutch master cylinder.
Attach the clutch master cylinder actuating
rod to the clutch pedal.
Lock the clutch master cylinder to the
pedal assembly.
2. Install the clutch master cylinder retaining bolts.
NOTE: Make sure that the locking plates are
3.
correctly seated.
Connect the clutch master cylinder hoses.
1. Connect the clutch master cylinder supply
line to the clutch master cylinder.
2. Connect the clutch slave cylinder supply
line to the clutch master cylinder.
Install the locking plates.
http://vnx.su