retaining nuts at this stage.
Attach the exhaust flexible pipe to the muffler
and tail pipe assembly.
4. Lower the vehicle.
NOTE: Install new catalytic converter to
5.
exhaust manifold retaining nuts.
Attach the catalytic converter to the exhaust
manifold.
6. Raise and support the vehicle. For additional
information, refer to: (100-02 Jacking and
Lifting)
Jacking
(Description and Operation),
Lifting
(Description and Operation).
7. Tighten the catalytic converter to cylinder block
retaining bolt.
NOTE: Remove the cable ties.
8.
Tighten the exhaust flexible pipe to muffler and
tailpipe assembly retaining nuts.
9. Tighten the exhaust flexible pipe to catalytic
converter clamp retaining nut.
http://vnx.su