Ford Transit 2002 Owner's Manual page 1169

Electronic Engine Controls - Heated
Oxygen Sensor (HO2S)—1.8L Duratec-
DOHC (85kW/115PS) - Zetec
Removal and Installation
Special Tool(s)
Socket, Fuel Injector (22 mm)
310-063 (23-050)
CAUTION: When installing a new HO2S, it is possible that the new component will be
supplied with a longer cable than the one removed. It is important that the cable is
routed and secured in such a way that it cannot be damaged by heat or moving
components and will not cause a noise, vibration or harshness (NVH) issue.
1. Remove the components in the order indicated in the following illustration(s) and table
(s).
Item Part Number
1 -
2 -
3 -
4 -
5 -
2. To install, reverse the removal procedure.
Removal Details
Item 5 : HO2S
Description
Expansion tank coolant pipe retaining clips
Bypass tube retaining clips
Bypass tube
HO2S electrical connector
HO2S
See Removal Detail
http://vnx.su
Transit/Tourneo Connect 2002.5 (06/2002-)
Print