Ford Transit 2002 Owner's Manual page 1267

Manual Transmission/Transaxle - Vehicles
With: Manual Transaxle, Vehicles With:
MTX-75 - Output Shaft
Disassembly and Assembly of Subassemblies
Special Tool(s)
Installer, Drive Pinion Bearing
205-068 (15-042)
Remover, Bearing/Gear
205-310 (15-091)
Materials
Name
Transmission oil.
Specification
WSS-M2C200-D2
Disassembly
1. Press off the transmission housing roller bearing
together with the reverse gear gearwheel using
the special tool.
2. Remove the reverse gear synchronizer ring.
1. Remove the needle roller bearing.
2. Remove the synchronizer ring.
NOTE: If gear changes are difficult, carefully
3.
remove the synchronizer hub assembly and
the fifth gear gearwheel
Remove the fifth and reverse gear synchronizer
hub assembly.
1. Remove the circlip.
2. Remove the synchronizer hub assembly.
4. Remove the fifth gear gearwheel.
1. Remove the synchronizer ring.
2. Remove the fifth gear gearwheel.
3. Remove the needle roller bearing.
http://vnx.su
Transit/Tourneo Connect 2002.5 (06/2002-)
Print