Ford Transit 2002 Owner's Manual page 1262

Manual Transmission/Transaxle - Vehicles
With: Manual Transaxle, Vehicles With:
MTX-75 - Input Shaft
Disassembly and Assembly of Subassemblies
Special Tool(s)
Remover, Bearing (Main Tool)
205-295 (15-050A)
Collet for 205-295
308-195 (16-060)
Collet for 205-295
308-196 (16-061)
Support Plate, Gear Removal
308-198 (16-063)
Support Plate, Gear Removal (Dia 85.1 mm)
308-230 (16-077)
General Equipment
Press
Materials
Name
Transmission fluid
Specification
WSS-M2C200-D2
Disassembly
All vehicles
1.
and the synchronizer cone must be handled
very carefully.
General note
2.
protectors.
Clamp the input shaft in the vice.
3. Pull off the taper roller bearing on the clutch
side.
http://vnx.su
Transit/Tourneo Connect 2002.5 (06/2002-)
CAUTION: The inner synchronizer ring
Graphical overview of the input shaft:
For additional information, refer to:
Transaxle (308-03 Manual
Transmission/Transaxle - Vehicles With:
Manual Transaxle, Vehicles With: MTX-75,
Description and Operation).
CAUTION: Use vice with soft jaw
Print
Manual