Ford Transit 2002 Owner's Manual page 1116

Item 3 : EGR cooler retaining bolt
Item 4 : EGR cooler outlet hose retaining clamp
Installation Details
Item 3 : EGR cooler retaining bolt
NOTE: Do not fully tighten the EGR cooler retaining bolt at this stage.
Item 2 : EGR cooler retaining clamp
NOTE: Install a new EGR cooler clamp.
NOTE: Make sure the clamp is installed in the same position as removed. The hinge of the
clamp should be obscured by the EGR cooler when viewed from the top of the engine.
This is to allow access to the catalytic convertor retaining nuts.
1. Drain the cooling system.
For additional information, refer to:
System Draining, Filling and Bleeding
Engine Cooling, General Procedures).
1. Lower the vehicle.
1. Using the special tool, detach the EGR cooler
outlet hose retaining clamp.
http://vnx.su
Cooling
(303-03