Ford Transit 2002 Owner's Manual page 1225

Loosen the left track rod end retaining nut.
CAUTION: Protect the ball joint gaiter
4.
using a soft cloth to prevent damage.
Detach the track rod end from the spindle carrier
using the special tool.
1. Release the track rod end.
2. Remove and discard the track rod end
retaining nut.
5. Loosen the lower suspension arm ball joint
retaining nut.
CAUTIONS:
6.
Do not unscrew the lower suspension
arm ball joint retaining nut in order to
protect the thread.
Protect the ball joint gaiter using a soft
cloth to prevent damage.
Protect the heat shield using a soft cloth
to prevent damage.
Using a suitable
lower suspension arm from the spindle carrier.
1. Use a soft faced hammer to strike the
lower suspension arm.
2. Remove and discard the retaining nut.
CAUTIONS:
7.
Secure the halfshaft to prevent damage
to the constant velocity joints. The inner
constant velocity joint must not be bent
more than 18 degrees. The outer constant
velocity joint must not be bent more than
45 degrees.
Close off the transmission openings to
http://vnx.su
two-legged puller, detach the