Ford Transit 2002 Owner's Manual page 1501

compartment.
Charging the A/C system (with liquid) via the
high-pressure connection.
1. Open the shut-off valve on the high-
pressure side.
2. Switch the refrigerant center to "Fill" mode
and fill with the prescribed quantity of
liquid refrigerant (R134a).
CAUTION: Only gaseous charging of the
11.
air conditioning system is performed via the
low-pressure connection.
Charging the A/C system via the low-pressure
connection.
1. Open the shut-off valve on the low-
pressure side.
2. Switch the refrigerant center to "Fill" mode
and charge with gaseous refrigerant.
3. Top up with the remaining amount of
refrigerant whilst the air conditioning is
switched on. For this purpose, run the
engine at approx. 1200-1500 rpm. Switch
the air conditioning to maximum cooling
power and fresh air mode. Set the blower
to maximum speed. Fill with the remainder
of the prescribed fill capacity.
12. WARNING: Do not detach the high-
pressure hose when the air conditioning is
switched on.
Disconnect the refrigerant center.
1. Close the shut-off valves.
2. Switch off the refrigerant center.
3. Disconnect the refrigerant center lines
from the A/C system charging connections.
4. Attach the protective caps to the filling
valves.
13. Attach the right-hand wheel arch trim panel
(shown with wheel removed for clarity).
http://vnx.su