Ford Transit 2002 Owner's Manual page 1218

Manual Transmission/Transaxle - Vehicles
With: Manual Transaxle, Vehicles With:
MTX-75 - Bearing Check
General Procedures
Transit/Tourneo Connect 2002.5 (06/2002-)
NOTE: Establish the cause of the damage
1.
and resolve it.
Check whether the bearing cage is damaged at
the top, side or at the openings is damaged
because of the unprofessional use of a special
tool or of the wrong tool.
Install a new bearing if necessary.
2. Check whether the ends of the taper rollers are
discoloured as a result of inadequate lubrication
or overheating, possibly through excessive pre-
load.
Install a new bearing and new seals if
necessary.
Check the bearing is correctly lubricated.
3. Check whether the ends of the taper rollers are
worn away due to incorrect installation,
excessive pre-load or faulty bearing seating.
Install a new bearing and new seals if
necessary.
Check the bearing is correctly lubricated.
4. Check whether the bearing surfaces are grey or
grey/black with deposits between the rollers.
Install a new bearing and new seals if
necessary.
Check the bearing is correctly lubricated.
5. Check whether the bearing ring surfaces are
grooved caused by static impact.
Install a new bearing if its surface is
rough, or if it is noisy.
http://vnx.su
Print