Ford Transit 2002 Owner's Manual page 1264

suitable press.
NOTE: Discard the snap ring.
Remove the fifth gear wheel.
1. Remove the snap ring.
2. Remove the gear wheel using the special
tool.
All vehicles
7. Remove the fourth gear wheel.
1. Remove the gear wheel.
2. Remove the needle roller bearing.
3. Remove the synchronizer ring.
NOTE: Discard the snap ring.
8.
Remove the third and fourth gear synchronizer.
1. Remove the snap ring.
2. Remove the synchronizer assembly.
NOTE: Mark the position of the selector ring
9.
with respect to the synchronizer hub for
installation. Components are paired.
NOTE: Carefully pull the selector ring off the
synchronizer hub. The detent balls are spring
loaded.
Disassemble the third and fourth gear
synchronizer.
1. Pull off the selector ring.
2. Synchronizer hub
3. Compression spring
4. Blocker bar
5. Detent ball
10. Remove the third gear wheel.
1. Remove the synchronizer ring.
2. Remove the gear wheel.
3. Remove the needle roller bearing.
Assembly
http://vnx.su