Ford Transit 2002 Owner's Manual page 1349

Fuel System - General Information - Quick
Release Coupling
General Procedures
General Equipment
Flat-bladed screwdriver
WARNINGS:
Do not carry lighted tobacco or open flame of any type when working on or near any
fuel related components. Highly flammable vapors are always present and can ignite.
Failure to follow these instructions may result in personal injury.
This procedure involves fuel handling. Be prepared for fuel spillage at all times and
always observe fuel handling precautions. Failure to follow these instructions may result
in personal injury.
CAUTION: Fuel injection equipment is manufactured to very precise tolerances and
fine clearances. It is therefore essential that absolute cleanliness is observed when
working with these components. Always install blanking plugs to any open orifices or
lines.
NOTE: Fuel supply line connectors are white or are identified by a white band. Fuel return
line connectors are red or are identified by a red band.
Transit/Tourneo Connect 2002.5 (06/2002-)
Disconnection
1. Release the fuel system pressure.
For additional information, refer to:
Pressure Release
General Information, General Procedures).
2. Disconnect the fuel line quick release coupling.
1. Press the fuel line quick release coupling
locking tangs.
2. Disconnect the fuel line quick release
coupling.
3. Disconnect the fuel line quick release coupling.
1. Pull the fuel line quick release coupling
locking tang.
2. Push the clip through the fuel line quick
release coupling to release the fuel line.
4. Disconnect the fuel line quick release coupling.
1. Press the fuel line quick release coupling
locking tangs.
2. Disconnect the fuel line quick release
coupling.
http://vnx.su
Fuel System
(310-00A Fuel System -
Print