Climate Control System - General
Information - Spring Lock Coupling
General Procedures
Transit/Tourneo Connect 2002.5 (06/2002-)
NOTE: Select special tool to suit the line
1.
diameter.
Fit the special tool.
Fit the special tool so that the inner collar
can be guided into the clamping spring.
2. Press the special tool into the clamping spring.
3. Disconnect the refrigerant line.
Discard the O-ring seals.
4. Connect the refrigerant line.
Check the clamping spring for damage.
Carefully pull out any damaged clamping
springs using a thin piece of wire and
install new one.
NOTE: Clean the connections using
5.
refrigerant oil and a lint-free cloth.
Press the indicator ring into the clamping spring.
6.
NOTE: Install new refrigerant line O-ring
http://vnx.su
Print