Ford Transit 2002 Owner's Manual page 1327

4. NOTE: Make sure that the exhaust flanges
are correctly aligned.
Tighten the catalytic converter to turbocharger
nuts in the sequence shown.
All vehicles
5. Lower the vehicle.
Vehicles with fixed vane turbocharger
WARNING: Make sure that new nuts are
6.
installed.
Tighten the catalytic converter to turbcharger
nuts:
Vehicles with M8 nuts tighten to 25 Nm.
Vehicles with M10 nuts tighten to 47 Nm.
All vehicles
7. Raise and support the vehicle.
For additional information, refer to:
02 Jacking and Lifting, Description and
Operation).
8. Tighten the catalytic converter to cylinder block
bolt.
9. Tighten the exhaust flexible pipe to the tailpipe
and muffler assembly nuts.
10. Remove the exhaust flexible pipe support wrap
or splint.
http://vnx.su
Lifting (100-