Ford Transit 2002 Owner's Manual page 1115

Removal Details
Item 2 : EGR cooler retaining clamp
NOTE: Make a note of the position of the EGR cooler clamp.
NOTE: Discard the EGR cooler clamp.
9. Lower the vehicle.
10. CAUTION: The turbocharger to charge
air cooler intake pipe hose retaining clamp
must be installed in the same position as
removed. Failure to follow this instruction
may cause premature failure of adjacent
components.
Install a new turbocharger to charge air cooler
pipe hose and clamp.
Remove and discard the turbocharger to
charge air cooler pipe hose and clamp.
Install a new turbocharger to charge air
cooler pipe hose.
Install a new turbocharger to charge air
cooler pipe hose clamp in the same
position as when removed.
CAUTION: The charge air cooler intake
11.
hose retaining clamp must be installed in the
same position as removed. Failure to follow
this instruction may cause premature failure
of adjacent components.
NOTE: Make sure that the inside of the
charge air cooler intake hose is clean and
free from any oil residue, as this will reduce
the installation grip of the hose to the charge
air cooler.
Install the charge air cooler intake pipe.
Clean the inside of the charge air cooler
intake hose.
Install a new charge air cooler intake hose
retaining clamp in the same position as
when removed.
12. Refill the cooling system.
For additional information, refer to:
System Draining, Filling and Bleeding
Engine Cooling, General Procedures).
http://vnx.su
Cooling
(303-03