Exhaust System - Catalytic Converter—
1.8L Duratec-DOHC (85kW/115PS) -
Zetec
Removal and Installation
Materials
Name
Anti-seize grease
Specification
SAM-1C9107-A
Removal
1. Remove the exhaust manifold heat shield.
2. Disconnect the heated oxygen sensor (H02S)
electrical connector.
3. Remove the H20S.
4. Detach the catalytic converter from the exhaust
manifold.
5. Raise and support the vehicle. For additional
information, refer to Section
Lifting.
6. Disconnect the catalyst monitor sensor electrical
http://vnx.su
Transit/Tourneo Connect 2002.5 (06/2002-)
Discard the nuts.
Print
100- 02 Jacking and