Ford Transit 2002 Owner's Manual page 1259

7. CAUTION: Do not damage the
transmission housing.
Separate the transmission housing sections.
1. Use a block underneath the lever to avoid
damaging the housing.
2. Separate the transmission housing
sections using two levers on opposite
sides.
NOTE: Slightly tilt the differential assembly.
8.
Remove the differential assembly.
Remove the magnetic disc.
9. Remove the selector rods and the first and
second gear selector fork.
10. Remove the selector forks.
1. Swivel the fifth and reverse gear selector
fork to the side and remove it.
2. Turn the third and fourth gear selector fork
and remove it.
11. Remove the snap ring from the reverse gear
idler.
12. Remove the input shaft and the output shaft.
Lever the input and output shafts together
out of the transmission housing.
Take out the reverse gear idler togeth er
with the needle roller bearing and the
thrust washers.
http://vnx.su