Ford Transit 2002 Owner's Manual page 1419

Remove and discard the blanking plug from the
fuel filter fuel tank fuel supply line and install the
hand pressure pump special tool adapter to the
fuel filter.
5. Install the hand pressure pump special tool
adapter to the fuel tank to fuel filter fuel supply
line.
NOTE: Make sure that the hand pressure
6.
pump arrow indicating the direction of fuel
flow is pointing towards the fuel filter.
Install the hand pressure pump special tool to
the hand pressure pump special tool adapters.
7. Operate the fuel hand pressure pump special tool
until fuel starts to flow through the fuel filter and
fuel pump and the hand pressure pump becomes
firm.
8. CAUTION: Do not operate the starter
motor for longer than 10 seconds at a time.
After 10 seconds, turn the ignition to position
0 and allow the starter motor to cool for 30
seconds before attempting to start the
engine again.
Start the engine and allow to idle until it reaches
normal operating temperature.
9. Switch the engine off.
10. Remove the hand pressure pump special tool
from the hand pressure pump special tool
adapters.
11. Remove the hand pressure pump special tool
adapter from the fuel tank to fuel filter fuel
http://vnx.su