Ford Transit 2002 Owner's Manual page 1174

Electronic Engine Controls - Crankshaft
Position (CKP) Sensor—1.8L Duratorq-
TDCi (Lynx) Diesel
Removal and Installation
Special Tool(s)
Timing Peg, Crankshaft TDC
303-193 (21-104)
NOTE: Install a new CKP sensor.
Transit/Tourneo Connect 2002.5 (06/2002-)
Removal
1. Disconnect the battery ground cable.
For additional information, refer to:
Disconnect and Connect
Mounting and Cables, General Procedures).
2. Disconnect the CKP sensor electrical connector.
3. Remove the CKP sensor retaining bolt.
4. Remove the CKP sensor.
Discard the CKP sensor.
Installation
1. If the new CKP sensor has a raised feature on
the tip, follow steps 2 through to 4. If the new
CKP sensor has a flat tip, follow steps 5 through
to 10.
2. CAUTION: The CKP sensor tip must rest
http://vnx.su
Print
Battery
(414-01 Battery,