-
2
3
-
4
-
5
-
4. To install, reverse the removal procedure.
Removal Details
Item 3 : Ignition switch and battery to starter motor solenoid cable electrical connector
Installation Details
Item 3 : Ignition switch and battery to starter motor solenoid cable electrical connector
Battery to transaxle ground cable
Ignition switch and battery to starter motor solenoid cable electrical
connector
See Removal Detail
See Installation Detail
Starter motor retaining bolt
Starter motor
1. Raise and support the vehicle. For additional
information, refer to Section
Lifting.
2. Disconnect the ignition switch and battery to
starter motor solenoid cable electrical connector
retaining nuts.
1. Lower the vehicle.
http://vnx.su
100- 02 Jacking and