Ford Transit 2002 Owner's Manual page 1435

Fuel Tank and Lines - Fuel Return Line—
1.8L Duratorq-TDCi (Lynx) Diesel/1.8L
Duratorq-TDDi (Lynx) Diesel
Removal and Installation
WARNINGS:
Do not smoke or carry lighted tobacco or open flame of any type when working on or
near any fuel related components. Highly flammable vapors are always present and may
ignite. Failure to follow these instructions may result in personal injury.
This procedure involves fuel handling. Be prepared for fuel spillage at all times and
always observe fuel handling precautions. Failure to follow these instructions may result
in personal injury.
Diesel fuel injection equipment is manufactured to very precise tolerances and
clearances. It is therefore essential that absolute cleanliness is observed when working
with these components. Always fit blanking plugs to any open orifices or lines.
4. Remove the components in the order indicated in the following illustration(s) and table
(s).
Transit/Tourneo Connect 2002.5 (06/2002-)
1. Disconnect the fuel return line quick release
coupling. For additional information, refer to
Section 310-00A Fuel System - General
Information / 310-00B Fuel System - General
Information.
2. Detach the fuel return line from the retaining
clip.
3. Remove the fuel supply line,
For additional information, refer to
Line - 1.8L Diesel
http://vnx.su
Fuel Supply
in this section.
Print