Ford Transit 2002 Owner's Manual page 685

NOTE: Make a note of the position of the fuel
19.
injectors to make sure that they are installed
in the same position.
Remove the fuel injectors and retaining clamps.
Discard the fuel injector clamp retaining
bolts.
Discard the fuel injector to cylinder head
sealing washers.
CAUTION: Loosen the camshaft bearing
20.
cap nuts and bolts by one turn each until the
camshaft is released.
NOTE: Make a note of the position of the
bolts and camshaft caps to make sure they
are installed in the same position.
Remove the camshaft.
Discard the camshaft oil seal.
NOTE: Make a note of the position of the
21.
valve tappets and adjustment shims to make
sure they are installed in the same position.
Remove the valve tappets and valve adjustment
shims.
22. NOTE: Make a note of the position of the
camshaft lower bearing shells to make sure
they are installed in the same position.
Remove the camshaft lower bearing shells.
NOTE: Make a note of the position of the
23.
camshaft bearing cap shells to make sure
they are installed in the same position.
Remove the camshaft bearing cap shells.
http://vnx.su