Setting The Destination Address Of The Statistics; Optional) Aging The Tcp Traffic By Its Fin Or Rst Flag - Huawei S9700 Series Configuration Manual

S9700 Core Routing Switch
Configuration Guide - SPU

5.3.4 Setting the Destination Address of the Statistics

Context
NetStream statistics can be sent to the NSC only if source and destination addresses are
configured.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 (Optional) Run:
ip netstream export source ip-address
The source address for exporting statistics is configured.
By default, the source address of the exported packets carrying the NetStream statistics is
0.0.0.0.
Step 3 Run:
ip netstream export host ip-address port-number
The destination IP address of the exported statistics, that is, the IP address of the NSC, is
configured.
If multiple destination addresses are configured, the statistics are exported to multiple NSCs.
You can configure up to 2 destination addresses to implement the backup between 2 NSCs.
----End

5.3.5 (Optional) Aging the TCP Traffic by Its FIN or RST Flag

Context
If the traffic received by the SPU contains the TCP FIN or RST flag, the traffic is aged. Then
the SPU stops the statistics collection and sends the result to the NSC.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ip netstream tcp-flag enable
The TCP traffic will be aged by its FIN or RST flag in the TCP packet header.
By default, the TCP traffic is not aged by the FIN or RST flag.
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 NetStream Configuration
151