Chrysler 2005 Crossfire SRT6 Service Manual page 426

5 - 260 BRAKES - ABS ELECTRICAL DIAGNOSTICS
1185-BAS TRAVEL SENSOR CIRCUIT (CONTINUED)
4.
MEASURE THE RESISTANCE OF THE BAS TRAVEL SENSOR GROUND CIRCUIT
With the ignition off.
Measure the resistance of the BAS Travel Sensor Ground circuit from
the CAB harness connector to the BAS Brake Booster C1 harness
connector.
Is the resistance below 5.0 ohms?
Yes >> Go to 5
No >> Repair the BAS Travel Sensor Ground circuit for an open.
Perform ABS VERIFICATION TEST.
5.
MEASURE THE VOLTAGE OF THE 5-VOLT SUPPLY CIRCUIT
With the ignition off.
Reconnect the CAB harness connector.
Turn the ignition on.
Measure the voltage of the BAS Travel Sensor 5-Volt Supply circuit at
the BAS Brake Booster C1 harness connector.
Is the voltage between 4.5 and 5.0 volts?
Yes >> Go to 6
No >> Go to 8
ZH