User Management; Account And Password; Account - Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual

User management

This section describes user management for management modules.

Account and password

An account and password are required to use the following console functions
on management module.
Log in to console
When log in to Web console and CLI console, you must enter the account and
password to avoid illegal login. Multiple accounts can be created to be used
by users respectively.
Sending and receiving files using FTP protocol
The management module can send and receive files in user directory to the
FTP server using the FTP protocol. When using the send and receive function,
you need to enter the account and password.
Tip: When logging in to the LCD touch console, the account is not required.
You can set a PIN to avoid illegal login. For details about the PIN, see
touch console on page

Account

The account can be created, changed, and deleted through the management
module console. You can register up to 16 accounts. For details about setting
items when creating a new account, see the Hitachi Compute Blade 500
Series Web Console User's Guide or the Hitachi Compute Blade 500 Series
CLI Console User's Guide.
The following table shows the setting items to create a new account.
The following table shows the account that is set as factory default setting in
the management module.
Account name
Status
Role
Language
CLI console prompt
Session timeout
Password
Hitachi Compute Blade 500 Series Management Module Setup Guide
2-7.
Table 2-1 Default account
Item
administrator
Enable
Administrators
Depending on the system setting
<Chassis ID><SVPSlotNumber>$
10 minutes
password
Functional detail
Description
LCD
2-3