LP 100R Laser Printer Operator's Guide
USB To Active
1. Select USB To Active from the Fonts menu. Press Enter.
2. The following screen displays:
3. If the USB To Active function is to be aborted, press Back, which causes the
system to return to the Manage Fonts menu without executing the USB To
Active function.
4. If the USB To Active function is not to be aborted:
a. Open the front door on the printer.
b. Insert the flash drive into the USB port on the front of the controller.
c.
Close the front door on the printer.
Rev: 1
Figure B-3. Accept/Abort USB To Active selected.
Page B-7
of 60 pages
Appendix B: Managing Files
April, 2014