SATO LP 100R Operator's Manual page 218

LP 100R Laser Printer Operator's Guide
3. Press the Up or Down triangle to move the selection bar to the Error Recovery
mode desired.
4. Press Enter to save the Error Recovery mode selected.
Note:
Pressing Enter after any Printer Setup function has been executed saves the

function. However, it does not store the function.
When the configuration completes, press Back until the Store Configuration

screen displays, and then follow the procedures for executing the Store
function (see
Rev: 1
page 6-63).
Page 6-104
of 128 pages
Chapter 6: Supervisory Functions
April, 2014