SATO LP 100R Operator's Manual page 238

LP 100R Laser Printer Operator's Guide
Note:
Brackets ( [ ] ) around a specific Paper Suction setting indicate that it is the

Default Paper Suction setting.
An arrow () pointing to a specific Paper Suction setting indicates that it is

the setting assigned to the current configuration.
3. Press the Up or Down triangle to move the selection bar to the desired Paper
Suction setting.
4. Press Enter to save the Paper Suction setting selected.
Note:
Pressing Enter after any Printer Setup function has been executed saves the

function. However, it does not store the function
When the configuration completes, press Back until the Store Configuration

screen displays, and then follow the procedures for executing the Store
function (see
Rev: 1
page 6-63).
Page 6-124
of 128 pages
Chapter 6: Supervisory Functions
April, 2014