LP 100R Laser Printer Operator's Guide
4. The print width can be increased or decreased in 2 different ways:
Enter the new print width on the numeric keypad and then press Enter.
or
Move the Up or Down triangle (to increase or decrease the print width)
and then press Enter.
Note:
Pressing Enter after any Printer Setup function has been executed saves the
function. However, it does not store the function.
When the configuration completes, press Back until the Store Configuration
screen displays, and then follow the procedures for executing the Store
function (see
Rev: 1
page
6-63).
Page 6-74
of 128 pages
Chapter 6: Supervisory Functions
April, 2014