Table of Contents
Advertisement
LP 100R Laser Printer Operator's Guide
Lines Per Inch
The Lines Per Inch setting specifies, in text lines, the number of lines per inch and
character height per line to be printed on the document.
Note: The Lines Per Inch setting can not be changed when a print job is in
progress.
1. Press the Up or Down triangle on the Printer Setup menu to move the
selection bar to the Lines Per Inch function.
2. Press Enter, which causes the following Lines Per Inch screen to display:
Current
number
per inch
Note:
•
Pressing CL after entering numeric data deletes 1 digit each time it is
pressed.
•
The number of lines per inch can be expressed only in Text Lines.
Rev: 1
Figure 6-58. Lines Per Inch screen.
Page 6-75
of 128 pages
Chapter 6: Supervisory Functions
April, 2014
Advertisement
Table of Contents
