LP 100R Laser Printer Operator's Guide
Note: The Vertical Adjustment can not be changed on the Default
Configuration.
5. The Vertical Adjustment can be increased or decreased in 2 ways:
Enter the new adjustment on the numeric keypad and then press Enter.
or
Move the Up or Down triangle (to increase or decrease the alignment)
and then press Enter.
6. Pressing Enter after the change has been made stores the change and returns
the system to the Offline Print menu.
7. Press the ONLINE switch to restart document printing.
Rev: 1
Chapter 6: Supervisory Functions
Page 6-81
of 128 pages
April, 2014