Table of Contents
Advertisement
LP 100R Laser Printer Operator's Guide
Configuration Function Menu
The Configuration function on the Supervisor menu is where you recall a
previously created configuration, store a new configuration (using a numeric
identifier), remove an existing configuration (by removing the identifier without
removing the configuration), or edit the currently active configuration.
Important Note: The Edit option in the Configuration function provides access to
all printer configuration elements (via the
By editing the currently active configuration, you can create a new configuration
and (if desired) save it as a new stored configuration.
Configuration Function Menu Access
1. When the Supervisor Menu displays, press the Up or Down triangle to move
the selection bar to the Configuration function.
2. Press Enter, which causes the following screen to display:
3. The functions that can be selected from the Configuration menu include:
Recall
Store
Remove
Edit
Rev: 1
Printer Setup menu
Figure 6-48. Configuration menu.
Page 6-60
of 128 pages
Chapter 6: Supervisory Functions
- see
page
6-69).
April, 2014
Advertisement
Table of Contents
