Table of Contents
Advertisement
LP 100R Laser Printer Operator's Guide
System Start-Up Screen Definitions (cont'd)
Item
C. Print resolution
D. Document size
E. Printer maintenance
F. Menu
G. Version
H. Recall
I. Off
Rev: 1
Definition
The print resolution (number of dots per inch)
that will be used when processing data in
accordance with the current configuration.
The document size that will be used when
processing data in accordance with the current
configuration.
A Warning message may display, which indicates
that one of the printer consumables needs to be
replaced or preventive maintenance needs to be
scheduled.
See
Chapter 4: Printer Maintenance
applicable corrective action.
Note: If corrective action is not taken at this
time, document processing will continue.
However, in some instances failure to take
corrective action may result in diminished print
quality.
Press Menu to switch the printer from the Online
Idle mode to the Offline Idle mode and provide
access to the LP 100R menu system. See
System
starting on page 3-14.
Specifies the software revision level currently in
use by the printer. It may also display a status or
error code.
Press Recall from this screen to switch the
printer from the Online Idle mode to the Offline
Idle mode and provide access to the Recall
Configuration menu.
See
Recall Configurations
Powers down the printer.
Note: Printer must be in Online Idle, Offline Idle,
or Offline Print for this to appear.
Page 3-12
of 32 pages
Chapter 3: Printer Operation
for the
Menu
starting on page 3-19.
April, 2014
Advertisement
Table of Contents
