Table of Contents
Advertisement
LP 100R Laser Printer Operator's Guide
3. If updates to the current configuration are to be stored:
a. Press Enter, which causes the audible alarm to sound and the following
screen to display:
Note: The Default Configuration (000) can not be overwritten.
b. If Enter is pressed, the updated changes will overwrite the old data stored
on the printer's hard drive, and the system will return to the Configuration
menu.
c.
If Back is pressed, the system will return to the Configuration menu
without storing the updated changes.
Rev: 1
Figure 6-51. Overwrite Configuration screen.
Page 6-64
of 128 pages
Chapter 6: Supervisory Functions
April, 2014
Advertisement
Table of Contents
